imgboxbg
Your location:
Homepage
/
/
/
CPTEK—Xingduan 1600T hot die forging automation offline ceremony and cold, warm and hot precision forging process and equipment technology forum were held.

CPTEK—Xingduan 1600T hot die forging automation offline ceremony and cold, warm and hot precision forging process and equipment technology forum were held.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2019-10-23
  • Views:0

(Summary description)Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech! Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech!

CPTEK—Xingduan 1600T hot die forging automation offline ceremony and cold, warm and hot precision forging process and equipment technology forum were held.

(Summary description)Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech! Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech!

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2019-10-23
  • Views:0
Information

The off-line ceremony and technical forum with the theme of intelligent forging automatic line, highlighting 1 1600T hot die forging automation line, 1 650T servo cold and warm precision forging automatic line, 1 400T servo cold and warm precision forging automatic line, 1 more than 250T Station sheet metal automatic stamping line and multiple servo stamping lines. The high positioning, the essence of innovation, and the many bright spots have set off a new storm in the forging industry, pushing intelligent forging to the forefront again.

 

A

 

Next, let us follow Xing Forging, walk into the off-line ceremony and technical forum, and jointly understand the current highest level of domestic hot die forging press automation production line.

01

leader's speech

At 9 o'clock in the morning, Mr. Zhang Qinglin, general manager of CPTEK-Xingduan, delivered a speech! On behalf of the whole family of Xingduan, general manager Zhang Qinglin expressed his warm welcome and heartfelt thanks to friends and relatives who came from afar!

 

cA

 

At the meeting, Mr. Zhang talked about the hard work of Xingduan, and gradually realized the servo stamping automated production line, the cold and warm precision forging intelligent automated production line, and as of today, the hot die forging intelligent automated production line has been realized. Really realized domestic customization instead of import! It won the unanimous applause of the guests present!

Subsequently, Mr. Han Mulin, the vice chairman of the China Forging Association, delivered a speech. He emphasized that the development of China's industry does not agree with the viewpoint of high quality and low price, and gave high recognition and higher expectations to the high-end intelligent equipment manufactured by Xing Forging!

A

 

Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech! Then, CPTEK, President of ZTE Precision Group—Mr. Zhang Zhongliang, Chairman of Xing Duan, delivered a speech!

A

 

At the meeting, Mr. Zhang talked about the hard work of Xingduan, and gradually realized the servo stamping automated production line, the cold and warm precision forging intelligent automated production line, and as of today, the hot die forging intelligent automated production line has been realized. Really realized domestic customization instead of import! It won the unanimous applause of the guests present!

Subsequently, Mr. Han Mulin, the vice chairman of the China Forging Association, delivered a speech. He emphasized that the development of China's industry does not agree with the viewpoint of high quality and low price, and gave high recognition and higher expectations to the high-end intelligent equipment manufactured by Xing Forging!

A

 

启动仪式由常务副总梁伯科主持

 

A

 

Mr. Xie Bin, the general manager of Nanjing Kangni who bought this equipment, and Mr. Zhang Qinglin of CPTEK-Xing Duan jointly pressed the start button!

 

 

New clutch

New brake

New height-sealing adjustment mechanism

New type lower ejection mechanism

New eccentric shaft and its dynamic load balancing technology

Subvert the industry's concept of domestic hot die forging presses!

03

technology Forum

After the offline ceremony, return to the conference room and start the technical forum meeting.

 

A

 

Mr. Li put forward the current situation of the use of domestic presses, and pointedly pointed out the difficulties and defects.

The failure rate is high (explained later), the chain is dropped at critical times, the production burden is difficult to bear, the economy is low (the user's return on investment is low), and the requirements for operators and maintenance workers are not low. The faults are specifically manifested in: (1) The clutch failure rate is very high, the friction block life is low, and there are very dangerous combo actions; (2) The brake angle and top dead center fluctuate too much, and it is difficult to adapt to the needs of automated forging; 3) High seal height adjustment failure rate; (4) Failure to lift the stewing mechanism; (5) Large press vibration/shake; (6) High linear velocity of the cylinder of the lower ejector mechanism and high failure rate; (7) The guide rail is easy to wear .

The guests at the scene seemed to have heard their own voices, so Director Li Jiangguo later proposed the positioning characteristics of the Xingduan hot die forging press.

Goal: Leading domestically.

Idea: Take EUMUCO technology as a platform + major upgrade + integration of new technologies.

Principle: Big problems are changed, and minor problems are changed.

It was highly recognized and unanimously appreciated by the guests present, as if seeing the dawn of domestic hot die forging presses, laying the foundation for domestic automated forging.

After a simple meal, the guests couldn't wait to join the technical forum in the afternoon.

 

A

 

Director Li Jiangguo gave a technical lecture and several research developments on precision forging technology.

 

A

 

Professor Wang Leigang, professor and doctoral supervisor of the School of Materials Science and Engineering of Jiangsu University, gave a technical lecture on the application of Deform in near net forming technology.

 

A

 

Mr. Xie Bin, general manager of Nanjing Kangni Electromechanical Co., Ltd. gave a technical lecture on the exploration of the integration of the two in the forging factory.

 

A

 

Mr. Xu Xianglong, chief expert of cold and warm precision forging of China Forging Association, gave a technical lecture on the requirements of cold and warm precision forging process for presses.

 

A

 

Professor Cui Zhenshan, deputy dean of the School of Materials Science and Engineering, Shanghai Jiaotong University, National Engineering Research Center for Die CAD and Chief Engineer of Shanghai Die Technology Institute, gave a technical lecture on the control mechanism and process realization of light alloy hot forgeability.

 

A

 

Dr. Jiang Peng, a researcher from Beijing Institute of Mechanical and Electrical Technology, gave a technical lecture on hot die forging process and die.

 

A

 

During the break of technical lectures, on-site communication was very active. Asking questions is sharp and direct, and the need for process improvement is imminent. The peers talked and exchanged harmoniously, how to make a good Chinese forging, and how to make a good domestic intelligent forging. Finally, Mr. Zhang Qinglin, general manager of Xing Duan, made a summary of the meeting, thanking everyone for coming and the recognition and support of the industry.

Forging people, we will fulfill our mission, forge ahead and forge ahead.

Tailor-made, replace imports, revitalize China's forging industry, and create high-end intelligent manufacturing equipment!

 

A

Scan the QR code to read on your phone

Relevant information

江苏兴锻智能装备科技有限公司

CPTEK

Hotline:

400-881-5698

Address: No. 28 Shangshang Road, Zhongguancun Science and

Technology Park, Liyang City, Jiangsu Province
Phone: 0519-87962289
E-mail:service@cptek.com.cn

 

Jiangsu CPTEK Servo Technology Co.,Ltd.  苏ICP备20005947号

Powered by: www.300.cn changzhou  IPV6